Insignia Fire Tv Remote Not Working (Easy FIX!)

Published:
Updated:

If you are having Insignia Fire TV Remote Not working, then this post would walk you through detailed step-by-step ways to fix this issue.

There can be several reasons from the battery being low, the Insignia TVs IR sensor getting blocked, and your remote being defective.

Why Should you Trust Me? Hi, I am Anirban Saha, an Engineer with a Specialization in Electronics and Communication Engineering. I have experience in Smart TVs, Electronics circuits, and Computer peripherals.

Insignia Fire Tv Remote Not Working
Insignia Fire Tv Remote Not Working

Let’s get started!

Insignia Fire Tv Remote Not Working

If your Insignia Fire TV remote is not working, you need to check your remote batteries and replace them if necessary. You can try cleaning the remote’s sensor end and try again. You can also reset your Insignia Fire TV. Your Insignia Fire TV remote will be working again.

Check the batteries in the remote of Your Insignia Fire TV

The first thing you should do is check the batteries in your remote. Batteries are the ones that get drained and cause the remote to stop working most of the time.

If the batteries are dead or dying, it could be the reason why the remote is not working. Try replacing the batteries and see if that fixes the issue.

If you don’t have any spare batteries, you can try charging the batteries. If they are rechargeable batteries, plug them into a charger and let them charge for a while. 

Once they are fully charged, try using the remote again.

Check the batteries in the remote of Insignia Fire TV

Clean the Remote

If replacing the batteries doesn’t fix the problem, the next thing you should try is cleaning the remote. Over time, dirt and dust can build up on the remote’s buttons, which can prevent them from working properly.

Also, as the Fire Tv remote is a Bluetooth one, most time the problem happens due to a battery issue. So, once the battery is loaded it will pair again.

There are Insignia Fire Tv remotes that also have an IR sensor in them. If your Insignia Fire Tv remote has an IR sensor, then clean that too. Often, there dust and dirt accumulate preventing the IR sensor to emit Infrared rays to your TV.

To clean the remote, you’ll need to remove the batteries and then use a soft, dry cloth to wipe down the remote. Be sure to avoid getting any moisture on the remote, as this could damage it.

If you are using a Remote Control cover that is very old, you can try removing it and trying again.

SmartPhone Camera Test to Check IR sensor of your Insignia Fire Tv Remote

SmartPhone Camera Test to Check IR sensor of your Insignia Fire Tv Remote

This step is not for all Insignia TV users.

If your Insignia Fire Tv Remote does not have an IR sensor you can proceed to the next step. Otherwise, you can follow this.

Take your Smartphone and Open the Camera. Keep the lights off and press a switch on the remote. Then check the smartphone’s camera.

The Infrared light though it is not visible to our eye, it is easily visible on Smartphone’s camera. Give it a try. This will ensure that the IR sensor of your Remote is working fine.

Use a Different Insignia Fire Tv Remote

If you have another Insignia Fire TV remote, try using that one instead. It could be that the remote you are using is the problem, not the TV. If the other remote works, then you know it’s an issue with the first remote.

If you don’t have another Insignia Fire TV remote, you can try using a universal remote. Universal remotes are designed to work with a variety of different TVs, so there’s a good chance it will work with your Insignia Fire TV.

Program the Universal Remote Properly if you are using that

You may need to reprogram if you are using a universal remote with your Insignia Fire TV. This is usually a simple process that can be done by following the instructions in your remote’s manual.

Once you have programmed it, you can use that with your Insignia Fire Tv.

Try resetting the Insignia Fire Tv

If none of the above solutions work, you may need to reset your Insignia Fire TV. This will restore the TV to its factory settings and may fix the problem.

To reset your Insignia Fire TV, press and hold the reset button on the back of the TV for 30 seconds.

Try using a Wireless Keyboard with Trackpad to control your Insignia Fire Tv

Using a wireless keyboard with an inbuilt trackpad is awesome as it works with Smart Tvs including Insignia Fire Tv quite well. Just start using a wireless keyboard with your Insignia Tv you will start loving it. The navigation feels to be a breeze.

Contact Insignia Customer Support

If you are still having issues with your Insignia Fire TV remote, you may need to contact Insignia customer support

They can help you troubleshoot the issue and get your TV working properly again. If that does not fix you can ask them whether you need a new replacement remote.

Getting a new Remote Control for your Insignia Fire Tv

If you find that your old Insignia Fire Tv Remote has stopped working, then there is no chance of it getting repaired. Rather it’s good to get a new replacement Fire Tv Remote for your Insignia TV.

Here is a good Insignia Fire Tv replacement I found on Amazon.

Insignia - Fire TV Replacement Remote for Insignia and Toshiba - Black
  • Easily replace missing or damaged remote: Pairs...
  • Maintain full voice control: Keep the same full...
  • Bluetooth technology: Utilizes both infrared and...

Last update on 2024-12-23 / Images from Amazon Product Advertising API

Conclusion

Let’s conclude the post!

Summing up the ways you can fix your Insignia Fire Tv remote not working issue:

1. Checking the batteries in the remote and Replacing Them.

2. Cleaning the Insignia Fire TV’s Remote Control.

3. Use a Different Insignia Fire TV Remote.

4. SmartPhone Camera Test to Check the IR sensor of your Insignia Fire Tv Remote

5. Program Universal Remote if you are using it.

6. Try resetting the Insignia Fire TV. 

7. Contact Insignia Customer Support.

8. Getting a new Remote Control for your Insignia Fire Tv

I hope you enjoyed reading the post.