Test several servers at once to find out if the problem is your connection or theirs.
Run a free packet loss test right in your browser. Test several servers at once to see your packet loss percentage, jitter and latency, and find out whether the problem is your connection or theirs. Get an A–F grade and a call and gaming suitability rating in as little as 20 seconds. No download or sign-up.
Note: Browsers cannot send ICMP pings, so each packet here is a tiny HTTPS request. A request that fails or passes the timeout counts as lost. TCP retransmits dropped packets behind the scenes, so real loss on your link can be higher than shown; it appears as extra latency. Grades, call quality (MOS) and the suitability list are estimates from these measurements. For best results, close other downloads and test on the device you care about.
Why run a packet loss test?
Lag spikes, frozen video calls and games that rubber-band are often caused by packet loss, not slow speed. A speed test will not catch it. A packet loss test will. This page sends a steady stream of packets to several servers, shows every drop as it happens and tells you whether the cause is your Wi‑Fi, your router, your ISP or the server itself.
What is packet loss?
Everything you do online travels in small units called packets. Packet loss happens when some of them never arrive. Video calls, voice chat and online games send data in real time, so a lost packet cannot be waited for. You hear a glitch, see a freeze or get pulled back in the game. Packet loss is measured as a percentage of packets sent, and it is usually reported together with latency (round-trip delay) and jitter (how much that delay varies).
Features of this packet loss test
- 5 test types: Quick check, Video call, Gaming, Stress burst and Monitor presets set the packet interval and duration for you.
- Multi-server testing: Test up to five built-in servers plus your own to separate local problems from server problems.
- Live packet lanes: Watch every packet succeed, slow down or drop in real time, one lane per server.
- Loss, jitter, latency, MOS: Median latency, jitter, P95 and maximum latency, plus an estimated call-quality (MOS) score.
- A–F connection grade: One clear grade that combines packet loss and jitter, with a plain-English verdict.
- Burst detection: Finds loss events and the longest run of consecutive drops, so you can tell outages from random noise.
- Automatic diagnosis: Explains the likely cause: Wi‑Fi, router, ISP or a single server.
- What it can handle: Rates the connection for video calls, gaming, streaming, voice calls and browsing.
- Monitor and alerts: Run continuously with a sound and notification when loss goes over your chosen percentage.
- Export and history: Download CSV or JSON, copy a report, print to PDF and compare earlier runs.
Why use this packet loss test instead of others?
- Finds who is at fault: Most packet loss tests check one server. This one compares several at once and tells you if the problem is your connection or theirs.
- Zero setup: Runs in your browser. No download, no account, no command line.
- Results you can act on: Grades, findings and next steps, not just a raw percentage.
- Evidence for your ISP: Timestamped loss events and exportable reports help you make a support case.
- Honest about limits: The method and its limits are explained on the page, so you know how to read the numbers.
How to test packet loss: step by step
- Choose a test type: Select Quick check for a fast look, Video call or Gaming to match your use, or Monitor to catch drops that come and go.
- Select at least two servers: Keep two or more of the built-in servers on, or add your own HTTPS address.
- Press Start test: Watch packets appear live. Close other downloads and streams first for a cleaner reading.
- Read the grade and findings: Check the loss percentage, A–F grade, jitter, latency and the “What the test found” panel.
- Repeat on Ethernet and save the report: If Wi‑Fi shows loss, test again on a cable. Export CSV, JSON or PDF to share with your ISP.
How to read your packet loss test results
The grade combines packet loss and jitter. Use this table to interpret it.
| Grade | What it means | In practice |
| A | 0% and jitter 30 ms or less | Excellent. Fine for calls, gaming and streaming. |
| B | Under 0.5%, or jitter over 30 ms | Good. Brief glitches are possible. |
| C | 0.5% to under 1.5% | Fair. Calls and fast games may stutter. |
| D | 1.5% to under 3% | Poor. Expect noticeable lag and dropouts. |
| F | 3% or more, or very high jitter | Bad. Real-time apps are unreliable. |
Where the loss shows up matters. Loss on every server at once points to your Wi‑Fi, router or ISP. Loss on one server only points to that server. Drops in bursts suggest short outages or interference, while scattered single drops suggest a weak signal or a nearly full link.
How to fix packet loss
- Use Ethernet: A cable removes Wi‑Fi interference and shows whether the problem is wireless.
- Move closer or change channel: Weak signal and crowded channels cause scattered single drops.
- Pause heavy traffic: Cloud backups, game updates and 4K streams can fill the link and cause drops.
- Restart modem and router: Clears stalled routers and renews your connection.
- Turn off your VPN: Test with it on and off to see if it adds loss or latency.
- Contact your ISP with proof: If every server loses packets over a cable, send them your exported report.
How this packet loss test works
Browsers cannot send ICMP pings like the command line ping tool. Instead, each packet here is a tiny HTTPS request to a reliable endpoint. A request that fails or passes your timeout is counted as lost. Because TCP retransmits dropped data, real loss on your link can be higher than shown, and it appears as extra latency. For best results, close other downloads, test on the device you care about and run longer tests for problems that come and go.
Packet loss test FAQs
A packet loss test sends many small data packets to one or more servers and counts how many never come back. The share that fails to return is your packet loss percentage. Even 1% loss can cause choppy video calls, rubber-banding in games and buffering.
Pick a test type, leave at least two servers selected and press Start test. A Quick check takes 20 seconds. For intermittent problems, use the Gaming preset (2 minutes) or Monitor mode, which runs until you stop it and alerts you when loss crosses your threshold.
0% is ideal. Under 0.5% is rarely noticeable. Between 1% and 2% you will start to see call glitches and game lag, and above 3% most real-time apps struggle. This test grades results from A (no loss) to F (3% or more).
It is a reliable indicator, with one limit worth knowing. Browsers cannot send ICMP pings, so each packet here is a tiny HTTPS request, and a request that fails or times out counts as lost. TCP retransmits dropped packets behind the scenes, so true loss on your link can be higher than shown; it appears as extra latency. Use it to find patterns and compare servers rather than as a lab measurement.
Because it tells you whose fault it is. If every server drops packets at the same time, the cause is on your side: Wi‑Fi, your router or your ISP. If only one server drops packets, the problem is that server or the route to it.
Common causes are weak or congested Wi‑Fi, a busy or faulty router, a damaged cable, network congestion at your ISP, an overloaded server, and VPNs or firewalls that interfere with traffic. The findings panel after each test points to the most likely cause for your result.
Switch to an Ethernet cable, move closer to the router, pause large downloads and streams, restart your modem and router, update router firmware and try disabling your VPN. If loss appears on every server even over Ethernet, run a longer test, save the report and send it to your ISP.
Packet loss is data that never arrives. Latency is how long a round trip takes. Jitter is how much that delay changes from packet to packet. Calls and games need all three to be low and stable, which is why this tool reports them together.
No account or install is needed. Your test history, chosen servers and settings are saved only in your own browser and can be cleared at any time from the History panel.
Yes. Add any HTTPS address under Servers and it is tested alongside the built-in Cloudflare, Google, Mozilla, Cloudflare 1.1.1.1 and Apple endpoints.
Conclusion
If your calls break up or your games lag while your speed test looks fine, run a packet loss test. Test at least two servers, try Wi‑Fi and Ethernet, and use Monitor mode for problems that come and go. In a few minutes you will know whether to fix your own network or point to your ISP, with a graded report to prove it.