Philips Roku TVs are a great way to watch your favorite shows, movies, and more.
But what do you do if you find your Philips Roku TV remote not working?
There are a few reasons why your Philips Roku TV might not be responding to the remote.
Maybe the batteries in the remote are running low and need to be replaced. Or, there could be something blocking the infrared sensor on the TV.
Finally, it’s possible that the TV’s software could be outdated and need to be updated.
Why Should you Trust Me? Hi, I am Anirban Saha, an Engineer with a Specialization in Electronics and Communication Engineering. I have experience in Smart TVs, Electronics circuits, and Computer peripherals.
In this post, I would discuss the detail of troubleshooting and fixing the Philips TV remote not working issue in easy steps.
Let’s get started!
Why is my Philips Roku TV not responding to the Remote?
If your Philips Roku TV isn’t responding to your remote, there are a few possible reasons why.
Here are a few things to check:
1. Philips Tv Remote Battery low:
Check to see if your Philips Tv Remote’s batteries are low.
If they are, replace them with new batteries and see if that fixes the issue.
2. Something blocking the IR sensor:
There may be something blocking the IR sensor on your Philips Roku TV.
Check to see if there’s anything obstructing the sensor and if so, remove it.
3. The remote is not paired with the Philips Roku TV
If you’ve just set up your Roku TV, it’s possible that the remote is not yet paired with the TV.
To pair the remote, open the battery compartment and press and hold the pairing button for 3 seconds.
The pairing light on the remote should blink.
If the pairing light doesn’t blink or the remote still doesn’t work, try the following:
Make sure the batteries are fresh
Press and hold the pairing button for 10 seconds
4. The remote is defective
If you’ve tried all of the above and the remote still doesn’t work, it’s possible that the remote is defective.
If you have a warranty, you may be able to get a replacement remote from Philips.
If you don’t have a warranty, you can purchase a replacement remote from Philips or from a third-party retailer such as Amazon.
5. Tv’s software is outdated:
It’s possible that the software on your Philips Roku TV is out of date.
To check, go to your TV’s settings and see if there’s an update available.
If there is, update your TV and see if that fixes the issue.
Philips Roku Tv remote not working
If your Philips Roku TV is unresponsive to the remote, there are a few things you can try to fix the issue.
#1. Check the batteries in the remote:
The first thing you should do is check the batteries in your remote.
If the batteries are dead or dying, it could be the reason why the remote is not working.
Try replacing the batteries and see if that fixes the issue.
If you don’t have any spare batteries, you can try charging the batteries.
If they are rechargeable batteries, plug them into a charger and let them charge for a while.
Once they are fully charged, try using the remote again.
#2. Clean the Remote
If replacing the batteries doesn’t fix the problem, the next thing you should try is cleaning the remote.
Over time, dirt and dust can build up on the remote’s buttons, which can prevent them from working properly.
To clean the remote, you’ll need to remove the batteries and then use a soft, dry cloth to wipe down the remote.
Be sure to avoid getting any moisture on the remote, as this could damage it.
#3. Use a Different Philips Roku TV Remote
If you have another Philips Roku TV remote, try using that one instead.
It could be that the remote you are using is the problem, not the TV.
If the other remote works, then you know it’s an issue with the first remote.
If you don’t have another Philips Roku TV remote, you can try using a universal remote.
Universal remotes are designed to work with a variety of different TVs, so there’s a good chance it will work with your Philips Roku TV.
#4. Program the Universal Remote Properly if you are using that
If you are using a universal remote with your Philips Roku TV, you may need to reprogram it.
This is usually a simple process that can be done by following the instructions in your remote’s manual.
#5. Try resetting the Philips Roku TV:
If none of the above solutions work, you may need to reset your Philips Roku TV.
This will restore the TV to its factory settings and may fix the problem.
To reset your Philips Roku TV, press and hold the reset button on the back of the TV for 30 seconds.
#6. Try using a Wireless Keyboard with Trackpad to control your Philips Roku Tv
Using a wireless keyboard with an inbuilt trackpad is awesome as it works with Smart TVs including Philips Roku Tv quite well.
Just start using a wireless keyboard with your Philips Tv you will start loving it.
The navigation feels to be a breeze.
#7. Try using the Roku mobile app
The Roku mobile app can be used as a remote control for your Roku TV.
If the remote is not working, the mobile app may be a good alternative.
#8. Contact Philips Customer Support:
If you are still having issues with your Philips Roku TV remote, you may need to contact Philips customer support.
They can help you troubleshoot the issue and get your TV working properly again.
Let’s conclude the post!
Summing up the ways you can fix your Philips Roku Tv remote not working issue:
1. Check the batteries in the remote.
2. Use a Different Philips Roku TV Remote.
3. Program Universal Remote if you are using it.
4. Try resetting the Philips Roku TV.
5. Contact Philips Customer Support.
I hope you enjoyed reading the post.
Anirban Saha is an Engineer with a specialization in Electronics and Communication. He is the Founder and Editor of techbullish.com. He has expertise in electronics, software development, gadgets, and computer peripherals. Anirban loves to share his knowledge to help people to help choose the right gadgets, troubleshoot gadgets, and more. Read more about our Editorial Guidelines.