TechBullish is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More.

Hisense TV Red Light Blinks 2 Times (EASY FIX!) (2022)

Hisense is known for its affordable range of TVs. Their TVs are updated with modern technologies though they make a budget-centric TV.

If you are looking to know why your Hisense TV Red Light Blinks 2 times and repeats itself and how to fix the issue, then you are at the right place.

In this post, I will explain the issue that this indicates and how can you fix that.

Hisense TV Red Light Blinks 2 Times

Why Should you Trust Me? Hi, I am Anirban Saha, an Engineer with a Specialization in Electronics and Communication Engineering. I have experience with Smart TVs, electronics circuits, and computer peripherals.

Let’s get started!

Hisense TV showing Red Light Blinking 2 times indicate an issue in your TV hardware. It can indicate an issue in the TV circuit or your TV Backlit.

Monitors are Crucial Components of ... x
Monitors are Crucial Components of your PC

If your Hisense TV Red light Blinks 3 times, or your Hisense TV Red Light blinks 6 times, you can check this article written by me to solve the issue.

Make sure you check the blinking sequence (how many times it blinks in a row) carefully so that you get to know about the correct issue with your Hisense TV.

Why is my Hisense TV blinking Red light?

Red Light Blinking in standby mode is a feature that indicates there is an issue with the TV based on the number of times the Standby Red light Blinking.

If your Hisense TV’s Red light keeps on blinking 2 times in a row, then you can follow the following troubleshooting steps below:

See also  Supersonic TV not working with HDMI (Reasons +Troubleshooting Tips)

#1. Power Cycle your Hisense TV

Power Cycle is one of the Effective fixes that you can use to solve this issue. 

This is a process where you turn the TV off and then back on again. It’s a simple solution, but it can often fix problems.

To power cycle your Hisense TV, first make sure that it is turned off. Next, unplug the power cord from the back of the TV. Wait for about 30 seconds, and then plug the cord back in. Finally, turn on the TV.

#2. Reset Your Hisense TV

If you’ve been having trouble with your Hisense TV, resetting it may help. This process will restore the TV to its factory default settings, which may solve any issues you’re experiencing. 

#3. Checking the Power Supply

Many times due to a faulty power supply, the Red light starts blinking on the Hisense Smart TV. 

You can try a different outlet or plug something else into the outlet to see if that fixes the problem. 

It can be also an issue due to the Power Supply part inside the back panel of the TV. You can take help from a technician as it is not recommended to open the TV back panel by yourself. 

#4. Call Hisense Customer Support

If your Hisense TV starts blinking a red light twice, don’t panic. This issue can be fixed by contacting the customer support of the brand. 

The technicians will help you troubleshoot the TV and guide you through the necessary steps to resolve the problem. In most cases, it’s just a simple fix and doesn’t require a replacement of the TV.

#5. Visit Nearest TV Repair Shop

The technicians at the TV repair shop will be able to determine the cause of the blinking red light and fix it accordingly. In most cases, it’s a simple fix and doesn’t require any major repairs. 

See also  Are Sony TVs Good? (+Are they Reliable?)

However, if there is something wrong with your TV that can’t be easily fixed, the technicians will let you know and give you a quote for the necessary repairs.

So if your Hisense TV is blinking red twice, don’t hesitate to visit the nearest TV repair shop. They’ll have it up and running again in no time!

Conclusion

Let’s conclude the post on Hisense TV Red Light Blinks 2 times!

I hope you have followed the troubleshooting steps to fix the issue. If it didn’t contact a TV Repair technician if TV is out of Warranty and Hisense Customer Support if TV is in Warranty.

I do not recommend touching the internal TV circuits and checking them on your own as it may even further cause more damage to the TV.

I hope you enjoyed reading the post.